WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
¥ Parts which heat up should not be exposed. Installation Wherever possible the back of the product should be against a wall. ¥ During normal operation, the condenser and compressor at the back of the appliance heat up ¥ If the appliance has been transported considerably.
Cleaning the interior Operation Before using the appliance for the first time, wash Insert the plug into the wall socket. the interior and all internal accessories with luke- Open the refrigerator door and turn the thermostat warm water and some neutral soap so as to remove knob, clockwise, beyond the ÇOÈ...
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half-shelves can lie over the rear ones. D338 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
HINTS cleaned and placed in the special drawer(s) Hints for refrigeration provided. Useful hints: Butter and cheese: these should be placed in Meat (all types): wrap in polythene bags and place special airtight containers or wrapped in aluminium on the glass shelf above the vegetable drawer. foil or polythene bags to exclude as much air as possible.
CUSTOMER SERVICE AND SPARE PARTS opening is not obstructed (see ÒDefrostingÓ If the appliance is not functioning properly, check that: section). ¥ If your appliance is still not working properly after ¥ the plug is firmly in the wall socket and the mains making the above checks, contact the nearest power switch is on;...
Page 8
conduct of ventilation having the following dimensions: Depth 50 mm Width 540 mm PR01 Slide the appliance into the recess, pushing it against the wall on the handle side. D022 If after having carried out the previously described operation there is still some space between the appliance and the kitchen unit, fit the trimming provided together with the appliance on the stop strip (A).
Page 9
Apply covers (B) on joint cover lugs and into hinge holes. D726 Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in Fig. and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws.
Need help?
Do you have a question about the ZI 9235 A and is the answer not in the manual?
Questions and answers