Advertisement
Series
Safety Instructions
These safety instructions are intended to prevent a hazardous situation and/or
equipment damage. These instructions indicate the level of potential hazard by a
label of "Caution", "Warning", or "Danger". To ensure safety, be sure to
observe ISO 4414
Note 1) ISO 4414: Pneumatic fluid power -- General rules relating to systems
Note 2) JIS B 8370: Pneumatic system axion
1.
The compatibility of pneumatic equipment is the responsibility of the person
who designs the pneumatic system or decides its specifications.
Since the products specified here are used in various operating conditions, their compatibility for the
specific pneumatic system must be based on specifications or after analysis and/or tests to meet your
specific requirements. The expected performance and safety assurance will be the responsibility of the
person who has determined the compatibility of the system. This person should continuously review the
suitability of all items specified, referring to the latest catalogue information with a view to giving due
consideration to any possibility of equipment failure when configuring a system.
2.
Only trained personnel should operate pneumatically operated machinery and
equipment.
Compressed air can be dangerous if an operator is unfamiliar with it. Assembly, handling or repair of
pneumatic systems should be performed by trained and experienced operators.
3.
Do not service machinery/equipment or attempt to remove components until
safety is confirmed.
1. Inspection and maintenance of machinery/equipment should only be performed once measures to
2. When equipment is to be removed, confirm the safety process as mentioned above. Cut the supply
3. Before machinery/equipment is restarted, take measures to prevent shooting-out of cylinder piston
4.
Contact SMC if the product is to be used in any of the following conditions:
1. Conditions and environments beyond the given specifications, or if product is used outdoors.
2. Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles, medical
3. An application which has the possibility of having negative effects on people, property, or animals,
7
ISE70/75/75H
Note 1)
, JIS B 8370
Caution :
Operator error could result in injury or equipment damage.
Warning :
Operator error could result in serious injury or loss of life.
Danger :
In extreme conditions, there is a possible result of serious injury or loss of life.
prevent falling or runaway of the driver objects have been confirmed.
pressure for this equipment and exhaust all residual compressed air in the system.
rod, etc.
equipment, food and beverages, recreation equipment, emergency stop circuits, clutch and brake
circuit in press applications, or safety equipment.
requiring special safety analysis.
Note 2)
and other safety practices.
Warning
Advertisement
