JUMO LOGOSCREEN 601 Manual page 16

3 Definitions
Example:
CASE integer_variable OF
definition1: integer_variable := 5;
definition2, definition3: integer_variable := 10;
END_CASE;
Texts
The folder "Texts" lists all definitions (TxtNo1 to TxtNo...) which represent the numbers of the texts in the
text list of the setup program. These definitions can be used in the ST code, for example, to address a
batch text.
The definitions can be inserted from the upper part of the window into the ST code at the desired position
in the editing window by dragging and dropping (or via the context menu: Copy).
In the lower part of the window, the definition is displayed in the first line (here: TxtIndex0 := 0). In the
following lines, the respective text is displayed in the individual device languages.
The texts themselves can also be changed in the ST editor (context menu: Alter... or Change...). When
you exit the ST editor, the changes are transferred to the configuration in the setup program if you exit
the "ST code" window in the setup program with "OK".
16