Product Overview; Overview; Features; System Confi Guration - Magnescale SmartSCALE SQ47-Z Series Instruction Manual

1. Product Overview

1-1. Overview

Th is product is a scale system that outputs position signals for machine tools and other equipment that
require high-precision positioning. It supports SIEMENS DRIVE-CLiQ serial communication. Scale units
of models that support the online diagnosis function are compatible with specialized online diagnostic
soft ware (supplied separately) that can be installed in SIEMENS SINUMERIK systems.

1-2. Features

• Scale - sensor head separated type with a simple structure.
• Th e scale and the sensor head both have sealed structures that achieve an IP67 degree of protection.
• Th e sensor head and connection cable are connected by a detachable connector. Th is simplifi es installing
the sensor head and connecting the cable.
• Includes a built-in function for correcting variations in scale signal levels for enabling high-precision
positioning. High-precision correction function developed exclusively by Magnescale Co., Ltd. is used
to realize high precision and high resolution.
• Th e unit contains a SIEMENS DRIVE-CLiQ interface chip to enable direct connection to a compatible
controller.

1-3. System Confi guration

SQ47-Z series
Scale Unit Configuration Scale Unit Configuration
Scale base
SQ47-Z Series, CH22 Series
CH22 series
Sensor head
Fig. 1-1
The controller that
supports the SIEMENS
DRIVE-CLiQ
Scale
Connection cable
1
(E)