Suggested Components for safe Operation
1.
1. Air Tool
2. Quick Coupling Adaptor
3. Pneumatic Pipe with Quick Couplers at both sides
4. Quick Coupling Adaptor
5. Quick Coupling
6. Valve
7. Oil-fog Lubricator
8. Pressure Regulator
9. Filter Unit
10. Air Source (Compressor)
Air Pressure and Air Volume
Operate the air impact wrench with a pressure of 6.3 bar (90 psi) using a
compressor with an air suction capacity of at least 200 l/min. When using
higher pressure for operating the air tool than the max. allowable pressure of
7 bar, its self life will be reduced drastically. The ideal capacity is provided by
compressors with a suction capacity of 300 – 400 l/min.
Only use air hoses with an inner diameter of at least 9 mm. When setting up
the air pressure, always keep in mind that the pressure will decrease approx.
0.6 bar when using a 10 m long hose with an inner diameter of 9 mm.
Storing
After use put the air impact wrench and the accessory into the transport box
into the intended slots.
Store all parts of the set in a dust and dirt-free location, between 10°C and
30°C.
Operation
2.
3.
5.
4.
6.
14
7.
9.
8.
10.