ResMed AcuCare F1-0 User Manual page 7


If oxygen is used with the ventilator, the oxygen flow must be
turned off when the ventilator is not operating, so that unused
oxygen does not accumulate within the device enclosure and
create a risk of fire.

At a fixed rate of supplemental oxygen flow (if used), the inhaled
oxygen concentration varies depending on the pressure settings,
patient breathing pattern, mask size selection and leak rate.

The technical specifications of the mask are provided so you can
check that they are compatible with the ventilator. If used outside
specification or if used with incompatible devices, the seal and
comfort of the mask may not be effective, optimum therapy may
not be achieved, and leak, or variation in the rate of leak, may
affect the ventilator function.

Discontinue using this mask if the patient has ANY adverse
reaction to the use of the mask.

Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult a dentist.

Refer to your ventilator manual for details on settings and
operational information.

Do not expose the mask to direct sunlight.

Remove all packaging before using the mask.

(AcuCare F1-1 and AcuCare F1-4 only) The elbow and valve
assembly have specific safety functions. The mask should not be
worn if the valve is damaged as it will not be able to perform its
safety function. The mask should be replaced if the valve is
damaged, distorted or torn.

(AcuCare F1-4 only) The vent holes must be kept clear.
Using your mask
The masks in this guide incorporate:

a standard female 22mm tapered fitting for external connection to the
ventilator

a standard Luer port for pressure sampling or supplemental oxygen if
required.
English 3