Abtus ABT-7100 Instruction Manual page 19

19
STEP 2. Put the TGMD on the track
The TGMD should be positioned on the track with the fixed side (marked L) on the left rail, facing
the desired direction of travel.
STEP 3. Connect the Windows device to the TGMD
- Turn on the TGMD and the Windows device.
- Open the TGMD software to see the home screen.
- Click 'Connect to Wi-Fi' in the top left corner of the screen.
- The trolley begins to send real time data to the Windows device. The Gauge, Cant/SE are
displayed below the 'Connect to Wi-Fi' button, but they are not recorded.
Figure 21 Connecting to TGMD
ABT 7100 – Issue 02