Displays - FLARM POWERFLARM FUSION Installation Manual

FLARM Technology Ltd
Hinterbergstrasse 15
CH-6330 Cham
rendered unusable. Should the device be suddenly cooled, this may result in the
formation of condensation.
Mechanical drawings of the device are available in Appendix A.
2.3

Displays

PowerFLARM Fusion should be connected to a FLARM Compatible display as a
primary means of collision avoidance. The display should be installed in the
primary field of view of the pilots. In aircraft with tandem seating, each pilot should
have a display in its primary field of view. Install the latest display firmware, if
applicable. It can be acquired from the display manufacturer. See the Installation
Instructions for the relevant display for specific instructions.
Many "FLARM displays" on the market have not been certified
as FLARM Compatible. Certified displays carry the FLARM
Compatible logo. Lack of certification may lead to the absence
of collision warnings and error/status codes, including
firmware expiration.
A list of displays certified as FLARM Compatible, as well as alternative means of
compliance, can be found in Appendix C. Displays certified as FLARM Compatible
can also be found in the Product Selector under the category "Primary Displays":
https://flarm.com/products/powerflarm/product-selector/
In addition to the connection to a FLARM Compatible display, Fusion can be
connected to a range of other displays, EFIS systems, and tablet applications. This
can be accomplished either as a cable connection or using Wi-Fi or Bluetooth. See
the User and Maintenance Manual for details.
POWERFLARM FUSION
INSTALLATION MANUAL
Date: 2020-11-10
Version: 1.0
Page: 13 of 38
Document Number:
FTD-077