Table of Contents
Advertisement
italic
1. Unpack the Terminal Block
Caution
Never touch the exposed pins of connectors.
2. Verify the Components
NI TB-2666 Installation Instructions
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
The terminal block is shipped in an antistatic package to prevent
electrostatic discharge (ESD) that can damage several components in the
terminal block. To avoid such damage when you handle the terminal block,
take the following precautions:
•
Ground yourself using a grounding strap or by touching a grounded
object.
•
Touch the antistatic package to a metal part of the chassis before you
remove the terminal block from the package.
Remove the terminal block from the package and inspect the terminal block
for loose components or any sign of damage. Notify NI if the terminal
block appears damaged in any way. Do not install a damaged terminal
block on a switch terminal block.
Store the terminal block in the antistatic package when not in use.
Make sure you have the following:
❑
TB-2666 terminal block
❑
PXI chassis
❑
PXI-2566 switch module
❑
1/8 inch flathead screwdriver
❑
Wire cutter
❑
Wire insulation stripper
2
ni.com
Advertisement
Table of Contents
