Standards - Juniper SRX Series Manual

SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards
Related
Documentation
60
Table 34: 1-Port G.SHDSL Mini-PIM LED States (continued)
Name Color
LINK Green
NOTE: There are four
LINK LEDs available
on the G.SHDSL
Mini-PIM. Each LED
provides the link
status of the wire pair.
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 57
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 241
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 58
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 59
1-Port G.SHDSL 8-Wire Mini-Physical Interface Modules Basic Configuration
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) complies with
the following standards:
ITU-T G.991.2—Symmetric high-speed digital subscriber line (SHDSL) transceiver
ITU-T G.994.1—Handshake procedures for digital subscriber line (DSL) transceivers (3
LC Comment)
ITU-T G.997.1—Physical layer management for DSL transceivers
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 57
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 241
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 58
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 59
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 59
State Description
On Link is active
Blinking Data communication is taking place
Off Link is inactive
Copyright © 2015, Juniper Networks, Inc.