AOR AR2300 Operating Manual page 17

4.4.3 MENU BAR DESCRIPTION (continued)
Area: Select the band plan region (USA, Japan or Europe).
Initialize Receiver: This will revert all settings to factory default and erase
ALL memory data. It is advised to do a backup to SD before using this
function.
Sleep Timer: Check the RUN box to activate, and set the number of
minutes before the receiver goes to sleep.
Priority Operation: The priority feature permits checking for activity on
one of the 2000 memory channels, while the AR2300 continues scanning,
searching or monitoring. The receiver is momentarily tuned to the priority
channel frequency to listen for any signal. If activity is found, the receiver
will remain on the active frequency until the signal disappears.
Squelch Hysteresis: Sets the squelch hysteresis depth. For ex.: When
squelch is -100dB and hysteresis is 6dB, the squelch opens when the
reception level exceeds -100dB. The squelch does not close until the
reception level is -106dB or less.
Create Clone File to SD Card: Saves all receiver settings and memory
data to the SD card which is inside the receiver.
To restore such a backup to a receiver, from the MENU BAR go to FILE >
SEND CLONE FILE ON SD CARD AFTER EXIT.
About ctrlsoft: Displays the software version.
(Version 1.0.4.7 is final)
Help: Accesses the inline help file for this software.
The content is outdated and supplied for reference
only. The printed or pdf manual you are reading
now is up to date.
12