Database Window Description - AOR AR2300 Operating Manual

4.4.4 DATABASE WINDOW DESCRIPTION

MAIN MEMORY LIST
Single left click: Highlights the line
Left double click: Activates the related function
Slow left double click: Edits the content of this cell
Right click: Opens a sub-menu related to this line
PC keyboard P key: Tunes to the frequency of the upper line
PC keyboard N key: Tunes to the frequency of the lower line
PC keyboard + key: Sets the upper line as a sub-band frequency
PC keyboard - key: Sets the lower line as a sub-band frequency
MEMORY tab
List-up of all stored memory channels. Can be edited, increased
and erased. Max. 2000 channels
MEMORY GROUP tab
Settings for each memory bank:
-Scan delay time (after signal is gone)
-Free time (arbitrary time for each signal)
-Bank enable / disable
-Bank linking
MEM BANK TITLE tab
Assign or edit a title for each of the 40 memory banks.
SEARCH BANK tab
Create, edit, erase search banks (max.40). Individually set the
frequency, mode, step, RF amp and ATT values.
SEARCH PASS tab
Lists all pass frequencies created during a bank search. Each
entry can be enabled, disabled or erased. Max. 30 pass
frequencies per bank.
SEARCH GROUP tab
Settings for each search bank:
-Scan delay time (after signal is gone)
-Free time (arbitrary time for each signal)
-Bank enable / disable & linking
SEARCH BOX
Allows incremental and case sensitive word search,
narrows down to the column selected on the left
side of the box.
LOG TAB
Log file of all scan and search hits, including time
stamp, signal level, mode, RF amp and ATT
settings, and hit counts.
Each hit can be copied to a bank / channel
DATABASE tab
List-up of the database which can be imported as a
".csv" file. Information is limited to frequency,
receive mode and text. The descriptive text
appears on the "main control" panel whenever a
signal is received on a frequency stored in the
database.
SCHEDULE tab
Schedule multiple events such as scan, search,
VFO reception and audio recordings.
RECORDING tab
List-up of all audio recordings in "wav" format.
(AR2300 line-out needs to be connected to line-in
of PC audio card)
ANT. SETTING tab
For frequencies over 25 MHz you can program an
automatic selection between 2 antennas. Multiple
band selections are possible.
13
.