Table of Contents
Advertisement
Advanced
X
SATA And RST Configuration
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host
Controller Interface).
Intel RST Premium With Intel Optane System Acceleration This option allows you to
create RAID or Intel Rapid Storage configuration along with Intel
acceleration on Serial ATA devices.
Use RST Legacy OROM
This field shows up when SATA Mode Selection is set to Intel RST Premium With Intel Optane
System Acceleration. Enable or disable to use RST Legacy OROM when CSM is enabled.
Port 0/1/2/3/4/5 and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
User's Manual | CS350
Chipset
X
PCI Express Configuration
Select one of the PCI Express channels and press enter to configure the following settings.
PCIE3/PCIE4/M.2-E/M.2-M/LAN2
Enable or disable the PCI Express Root Port.
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. Gen 3 is only available for
the PCIE1 port. This field may not appear when the speed of the port is not configurable.
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the port does
not support hot plug.
Detect Non-Compliance Device
Enable to detect non-Compliance PCI Express Device by consuming more POST time.
Optane
system
™
®
PCH-IO Configuration
X
Chapter 3
BIOS SETTINGS
46
Advertisement
Table of Contents
