Husqvarna 28012979044 Information page 4

4
Scope of supply
1x headlight protection
2x collar screw M6x25
2x collar screw M5x30
2x distance piece, thin
2x distance piece, wide
Assembly
- Remove screws .
- Remove screws .
- Remove screw and tilt headlight forward.
- Position headlight with headlight protection
NOTE
Position headlight protection on the headlight from above.
- Mount screws with thin distance pieces
not tighten yet.
- Mount screw but do not tighten yet.
- Adjust the headlight range (see owner's manual).
- Tighten screw to 5 Nm.
- Mount screws with wide distance pieces
tighten to 5 Nm (Loctite 243).
- Tighten screws to 2 Nm (Loctite 243).
(included).
(all included) but do
(all included) and