Advertisement
The EASTWOOD BENCHTOP BLAST CABINET is specifi cally designed with heavy-duty components and a quality powder coated fi nish to provide years of
trouble free service. It features a fl uorescent work lamp for increased visibility and a baffl ed, fl ow-through ventilation design with an external vacuum
connection – all in a compact, space saving confi guration.
SAFETY INFORMATION
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
READ INSTRUCTIONS
Thoroughly read and understand this manual before using. Save for future reference.
• Always plug into a properly grounded outlet.
• Under certain conditions (e.g. atmospheric humidity levels, type of media being used and/or type of media being blasted), the friction
of abrasive blasting may generate static electricity and result in shocking. We recommend grounding the blast cabinet in accordance
with local electrical codes.
• For well ventilated indoor use only.
• DO NOT USE SAND IN THIS UNIT as serious respiratory health issues could result. The use of Eastwood blast media is strongly
recommended for proper operation. Always select a grit size of 60 or fi ner to avoid nozzle blockage.
• Never operate the blast cabinet with the lid open. Always make sure the lid is securely latched and sealed before operating.
• For maximum safety and results, operate the blast cabinet with a properly fi ltered shop-type, dust collecting vacuum. (Eastwood
#20098 Rockford Shop Vacuum works great). If dust is seeping out of your vacuum fi lter, stop immediately! This is a serious health
hazard and will prematurely burn out your vacuum motor. Purchase and install a fi ne particulate fi lter for your particular brand of
shop-type vacuum to capture these dust particles.
• Never overload the blast cabinet. Maximum weight capacity of object to be blasted is 50 lbs. Maximum weight capacity of blast media
is 25 lbs.
• Always use a clean, dry, regulated air supply. Moisture and or oil in air supply will cause clogging of blast media. Inlet air pressure
must not exceed 90 PSI. Excessive air pressure can cause permanent damage to the unit and personal injury.
SPECIFICATIONS
• Electrical current requirement (lamp):
120 Volt AC, 60hz
• Air supply requirements:
10 CFM @ 80 PSI
• Internal Dimensions:
22" wide x 18" deep x 12" high
2
SHOCK HAZARD!
ABRASIVE MEDIA HAZARD!
OPERATIONAL HAZARDS!
23.5"
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
19.625"
19.25"
Advertisement
