Table of Contents
Advertisement
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
• The Eastwood Elite 27" Bead Roller consists of heavy metal components which can present a hand/finger pinch hazard and cause
potentially serious injuries, if dropped. Avoid pinching hands while handling. The use of safety shoes is strongly recommended.
Keep fingers and hands away from moving parts when operating.
•
Handling sharp metal can cause serious cuts. Wear thick, well-fitting work gloves to prevent cuts from handling sharp metal.
• Metal particles can be ejected from the metal surface when bending. Sheet metal edges and corners are sharp and can injure eyes.
Always wear ANSI approved eye protection when operating this tool.
• Before beginning ANY work with this tool, it is absolutely necessary that it be installed in a vice properly secured to a sturdy,
workbench anchored to the floor or wall.
• Strenuous physical force may need to be applied to the Eastwood Elite 27" Bead Roller during use. Failure to ensure proper footing can
quickly result in a fall which could inflict serious personal injury or property damage. Always work in a clean, uncluttered environment.
Be sure there is sufficient working room around the tool to allow for safe handling of various sizes of metal.
• Excessive resistance while operating could indicate a defect with the workpiece material or broken or damaged Eastwood Elite
27" Bead Roller components. To avoid injury, stop work immediately and inspect workpiece material for nicks, dents, welds,
excessive scale or remaining coatings. Clean or repair as necessary or discard and begin with a new piece. Also inspect
Eastwood Elite 27" Bead Roller components for looseness or damage.
To order parts and supplies: 800.343.9353 >> eastwood.com
PINCH AND CRUSH HAZARD!
CUT HAZARD!
EYE INJURY HAZARD!
3
Advertisement
Table of Contents
