Preparing To Connect Your Equipment To The Projector - Toshiba TDP590 Manual

Preparing to Connect Your Equipment to the Projector

Now you're ready to connect your equipment. Computers are connected
to the PR-Cable. Video players are connected directly to the projector.
Steps for connecting the different types of equipment are given on the
pages listed below.
Equipment you want to connect
Laptop computer with PR-Cable
Desktop computer with PR-Cable
USB or PS/2 mouse
Video player
composite
s-video
video
Page
page 8
page 10
pages 10-11,
page 11
page 12
L/R audio in
(for video source)
PR-Cable
computer
audio in
F 6
IGURE
Connector panel
NOTE: Before you continue,
make sure the projector and
your equipment are turned off. If
you're connecting a computer,
make sure the distance between
it and the projector is 10 feet or
less.
NOTE: The computer audio in
connector on the connector
panel is only used with the
optional PR-Cable Lite cable. If
you are using PR-Cable, the
audio cable should be connected
to the PR-Cable, not directly to
the projector.
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connec-
tor, you must use a Mac adaptor
between the computer and the
PR-Cable.
7