Table of Contents
Advertisement
VIEWING VIDEO IMAGES
A. Connecting the projector to video equipment
Preparations:
•
Check to be sure that the power for the projector and video equipment is turned off.
1
DVI
VIDEO
COMPONENT1
Y
Cb/Pb
Cr/Pr
COMPONENT2
S-VIDEO
RS-232C
3
DVI
VIDEO
COMPONENT1
Y
Cb/Pb
Cr/Pr
COMPONENT2
S-VIDEO
RS-232C
•
Also, read the instruction manual of the video equipment to be connected.
•
No speaker for audio output is stored in this projector. To reproduce audio signals, connect audio equipment.
•
Consult the delivery agent of this projector on the detailed connections, as needed.
Connecting to DVD players
When connecting this projector to a video equipment that has component video output terminals, such as
DVD players, connect video cables to COMPONENT (1 or 2) terminals.
DVD player or
BS digital tuner
C
(P
)
C
(P
)
B
B
R
R
•
Playback picture images of some of DVD players may not be able to be properly projected on screen.
18
To VIDEO terminal
Video cable
To video output terminal
Video player, or the like.
2
To S-VIDEO terminal
S-video cable
To S-video output terminal
Video player, or the like.
4
To audio output
terminals
Y
Video cables
(Commercially available)
1 Connect an end of a commer-
cially available video cable to
VIDEO terminal of the projector.
2 Connect the other end of the
video cable to the video output
terminal of the video equipment.
If S-video output terminal is provided with the video
equipment, make the connection as follows:
3 Connect an end of a commer-
cially available S-video cable to
the S-VIDEO terminal of the pro-
jector.
4 Connect the other end of the S-
video cable to the S-video out-
put terminal of the video equip-
ment.
To audio input
terminals
VIDEO
COMPONENT1
Y
Cb/Pb
COMPONENT2
S-VIDEO
To COMPONENT
(1 or 2) terminals
DVI
Cr/Pr
RS-232C
Advertisement
Table of Contents
