Table of Contents
Advertisement
Do you want to control your computer's mouse from the projector's remote
or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable
1 Unplug the mouse cable from your computer.
2 Plug the
end of the PR-Cable mouse cable into the mouse con-
nector on your computer.
3 Plug the
end of the PR-Cable mouse cable into the
tor on the PR-Cable.
mouse cable
Connecting the PR-Cable monitor, audio and mouse cables to a desktop comput-
If your computer has a USB connector and is running Windows 98, use the
USB mouse cable
1 Plug the
mouse connector on your computer.
2 Plug the
end of the PR-Cable mouse cable into the
tor on the PR-Cable.
You must have the appropriate USB drivers installed on you computer
to use the USB feature. Windows 98 ships with the appropriate drivers.
Now you're ready to power up the projector and your computer. Skip to
"Powering up the Projector and Adjusting the Image" on page 14.
audio cable
monitor cable
end of the PR-Cable mouse cable into the
NOTE: A USB mouse is hot-
pluggable, meaning you do not
connec-
need to re-boot your computer
after connecting the mouse to
use it. A PS-2 mouse is not hot-
pluggable.
F
10
IGURE
er
NOTE: The USB mouse is sup-
ported for use with Windows 98
connec-
only.
11
Advertisement
Table of Contents
Troubleshooting
