Advertisement
Quick Links
Installation and Operating Instructions for Existing Homes with Standard Piping
SUPERSEDES: October 8, 2015
Plant I.D. #001-1024
TacoGenie
is manufactured using the highest quality component parts avail-
®
able. Patented Integral Flow Checks (IFC
to prevent cold water from entering the hot water line. State-of-the-art electron-
ics allow the TacoGenie to accurately sense temperature and automatically shut
off the pump to maximize comfort and energy savings. TacoGenie saves energy
and water. You can look forward to over 15 years of life expectancy with a
TacoGenie.
www.TacoComfort.com
Instruction Sheet
Pre-Fab Easy Installation
For Models: 006-CT-USK, 008-CT-USK
®
) are built into each TacoGenie pump
®
A Taco resource – saving product
102-140
EFFECTIVE: December 1, 2015
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Taco TacoGenie 006-CT-USK
Summary of Contents for Taco TacoGenie 006-CT-USK
- Page 1 TacoGenie to accurately sense temperature and automatically shut off the pump to maximize comfort and energy savings. TacoGenie saves energy and water. You can look forward to over 15 years of life expectancy with a TacoGenie. www.TacoComfort.com A Taco resource – saving product...
-
Page 2: Pre-Installation Checklist
(hot water to cold water side) prior to connecting the flex lines. Note: T’s and flex lines supplied by Taco provide maximum flow and performance. Alternative plumbing parts may restrict flow and delay hot... - Page 3 INSTALLATION FOR THE CT-SERIES TACO GENIE MODELS 006-CT-USK AND 008-CT-USK The two custom adapter “T”s are designed to simplify your installation to ⁄ inch copper hot and cold supply lines. If you have plumbing other than as shown in these instructions, additional fittings may be required.
-
Page 4: Completing Your Installation
(black, white and green) on the black wire. INSTALLING OPTIONAL MOTION SENSOR STARTER KIT 1. For motion sensor operation, the Taco #554-4 hard-wired motion sensor starter kit (sold separately) can be installed. Note: The motion sensor kit and wireless trans- mitter kit cannot be installed together because they operate on different voltage. - Page 5 D. Wire to push button is not con- wires have good contact. nected well. E. The temperature setting is • Call Taco Technical Service at already sensing “hot” water so 1-401-942-8000 to reset sensi- the pump is not being activated.
-
Page 6: Limited Warranty Statement
If in doubt as to whether a particular substance not allow limitations on how long an implied war- is suitable for use with a Taco product or part, or ranty lasts or on the exclusion of incidental or for any application restrictions, consult the...
Need help?
Do you have a question about the TacoGenie 006-CT-USK and is the answer not in the manual?
Questions and answers