Download Print this page

Taco 00e Series Instruction Sheet

Delta-t variable speed, ecm high-efficiency circulator
Hide thumbs Also See for 00e Series:

Advertisement

Quick Links

SUPERSEDES: February 10, 2021
Plant ID No. 001-4267
DESCRIPTION:
The 00e® series VT2218 circulator is a temperature sensing, self-adjusting, variable speed
wet rotor circulator with an ECM, permanent magnet motor. Operating modes include
Delta-T, constant speed, set point heat, set point cool, and boiler protection. Its high
efficiency motor reduces power consumption by up to 85% compared to equivalent
AC permanent split capacitor circulators.
APPLICATION:
• Maximum operating pressure: 125 psi (862 kPa)
• Minimum water temperature: 36ºF (2ºC)
• Maximum water temperature: 230°F (110ºC)
• Electrical specifications:
Voltage: 110-120V, 50/60 Hz, single phase
Maximum operating power: 58W
Maximum amp rating: 0.67
• Equipped with a cast iron casing and should be used for closed loop systems only
• Taco circulator pumps are for indoor use only – employer uniquement a l'interieur
• Acceptable for use with water or maximum of 50% water/glycol solution
FEATURES:
• 5 operating modes:
- Delta-T - variable speed, maintains constant ΔT, provides exact GPM flow required
- Constant Speed - 4 fixed speeds, maintains constant flow for zoning
- Set Point Heat - variable speed with boiler protection option, decreases speed on temperature rise
- Set Point Cool - variable speed, increases speed on temperature rise
- Boiler Protection - protects boiler from low return temperature and flue gas condensation
• Illuminated LCD displays:
- Operating mode, speed or temperature setting, watts, gpm, supply temperature,
return temperature, and error code diagnostics.
• Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation.
• Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required
• Nut capture feature on flanges for easier fit up
• Whisper quiet operation
• BIO Barrier® protects the pump from system contaminants
• SureStart® automatic unblocking mode
• Optional, 2-way flange model available to reduce SKU's and provide universal fit-up to any flange position
00e® Series VT2218
Instruction Sheet
Delta-T Variable Speed, ECM High-Efficiency Circulator
-1-
102-525
Use for pumps
with date
code 09-17
or after.
EFFECTIVE: August 16, 2021
For more information, visit
www.TacoComfort.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the 00e Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Taco 00e Series

  • Page 1 - Operating mode, speed or temperature setting, watts, gpm, supply temperature, return temperature, and error code diagnostics. • Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation. • Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required •...
  • Page 2 KEY: VI, V2, V3 = SHUT-OFF ISOLATION VALVE P = TACO CIRCULATOR WITH IFC FF = FAST FILL BOILER FEED VALVE PV4 = PURGE VALVE RECOMMENDED PURGING STEPS: 1. CLOSE V1, PV4, V2 2. OPEN V3 3. OPEN FF VALVE 4.
  • Page 3 KEY: VI, V2, V3 = SHUT-OFF ISOLATION VALVE P = TACO CIRCULATOR WITHOUT IFC INSTALLED FF = FAST FILL BOILER FEED VALVE PV4 = PURGE VALVE ZV = ZONE VALVE RECOMMENDED PURGING STEPS: 1. CLOSE V1, PV4, V2 2. OPEN V3 AND ZV3 3.
  • Page 4 Typical Variable Speed Applications: Across a Series Supply Sensor Loop System Using • Delta-T Zone Valves - Varies speed to maintain Return Sensor a constant temperature differential (∆T) Outdoor Sensor Supply Across Multi-Zone Sensor Radiant Manifolds with Loop Actuators Return Boiler Sensor Sensor...
  • Page 5 CAUTION: To reduce the possibility of noise transmission, be sure to add vibration dampeners to piping when mounting circulator to wall or floor joists. ATTENTION: Pour réduire la possibilité de transmission de bruit, veillez à ajouter des amortisseurs de vibration à la tuyauterie lors du montage du circulateur sur des chevêtres de mur ou de plancher. 3.
  • Page 6 To change operating mode and settings: a. Press and hold the SET button for 3 seconds until the operating mode on the LCD begins to flash. b. Use the UP or DOWN buttons to scroll through the 5 operating mode options.
  • Page 7 85,362 15,311 3,760 1,172 62,465 11,883 3,050 46,218 9,299 2,490 Pump Cross Reference (Constant Speed Mode): SPEED TACO GRUNDFOS WILO B & G/XYLEM ARMSTRONG Alpha-15-55 (1) Alpha-15-55 (2) UP-15-42 Astro 230 (1) Star S-21 (1) NRF-25 (1) UPS-15-58 (1) Astro 230 (2)
  • Page 8: Limited Warranty Statement

    This warranty gives the purchaser specific rights, and is suitable for use with a Taco product or part, or TACO WILL NOT BE LIABLE FOR ANY SPECIAL for any application restrictions, consult the...

This manual is also suitable for:

Vt2218