Lcdk Block Diagram; Resources And Training - Texas Instruments OMAP-L138/C6748 User Manual

Introduction
NOTE:
• The LCDK does not have an onboard emulator. An external emulator from TI or a third-
party will be required.
• The LCD port connector was designed to support an off-the-shelf LCD panel that is no
longer available from any vendor. We are not aware of any other off the shelf LCD panel
that will work with LCDK. You need to create your own adapter board in order to
evaluate an LCD panel using the LCDK board.
1.2 Getting Started
Steps to Get Started
Take a tour of the hardware
Run out of the box demo
Software download
Hardware setup
RTOS software setup
Linux softwaresetup
4
OMAP-L138/C6748 Low-Cost Development Kit (LCDK)
Figure 1. LCDK Block Diagram
Table 1. Resources and Training
TMDSLCDK6748
Introduction to TMDSLCDK6748
Video Training
Processor SDK OMAPL138
TMDSLCDK6748 Hardware setup
Processor SDK RTOS Getting Started Guide
OMAP-L138/C6748 LCDK Hardware Setup with CCS
Not applicable
Copyright © 2019, Texas Instruments Incorporated
TMDSLCDK138
Introduction to TMDSLCDKL138
Video training
Processor SDK OMAPL138
TMDSLCDKL138 Hardware Setup
Processor SDK Linux Getting Started Guide
SPRUIL2A – February 2019 – Revised September 2019
Submit Documentation Feedback
www.ti.com