Texas Instruments OMAP-L138 DSP + ARM9 Quick Start Manual

Troubleshooting
If you do not have the USB-to-UART driver installed on your PC, download it from
www.ftdichip.com/Products/ICs/FT232R.htm
For community support, please visit:
The online LCDK User's Guide is available at
processors.wiki.ti.com/index.php/LCDK_User_Guide
The TI Embedded Processors Wiki can be found at:
For more information on the TI OMAP-L138 applications processor or to download
the latest TI software, visit:
www.ti.com/omapl138
All trademarks are the property of their respective owners.
www.ti.com/e2e
processors.wiki.ti.com
Congratulations on purchasing the OMAP-L138 DSP+ARM9
and welcome to the Quick Start Guide. This guide is designed to help you through
the initial set up of your development kit. The kit provides hardware and software that
allows you to quickly and easily evaluate TI's OMAP-L138 applications processor.
The following items will be used in this Quick Start Guide.
OMAP-L138 Development Board
1
Set the DIP switch with 2, 3, 4 ON
and 1, 5, 6, 7, 8 OFF.
SPRW234
7
™ Development Kit (LCDK)
Power supply Mini USB cable
and cord
4GB SD
OMAP-L138
DSP+ARM9
™
OMAP-L138
Processor Application
Linux 3.1 ™
microSD Card + Adapter
Linux™ SDK
Linux fi le system
BIOS C6SDK
Code Composer Studio™ IDE v5
Code Gen Tools 7.3.1
2
Connect the supplied mini USB
cable to J3 on the UART-USB port
on the LCDK. Connect the other end
of the cable to a USB port on your
host computer.
1
2