Recording - Kenwood R-SE7 Instruction Manual

28

Recording

Recording
Top side
Reverse
side
Check the tape transport direction
indicator.
2
rev. mode
Dolby NR
3 3
Downloaded from: http://www.usersmanualguide.com/
0
1 . Load a tape in deck.
1 1
2 . Select the tape transport direction.
3
3 . Set the recording condition.
3 3
Note that this cassette deck cannot record onto M etal
Note Note
tapes.
3 3
1 Open the tray of the cassette deck.
2 Insert a tape.
3 Close the tray.
÷ Differentiation betw een normal (TYPE I ) and high
(TYPE II ) tape is set automatically.
÷ Remove tape slack before loading.
To reverse the transport direction
1 Press the playback key for the direction to be played (lights green).
2 Stop playback (lights red).
÷ When recording is started, the tape is transported in the
direction selected in this step.
÷ Wind the tape to the position w here recording is to be
started.
1 Select the reverse mode.
2 Select the DOLBY NR mode.
1 1
2 2
5 5
3 3
£
£
Recording
R-SE7 / DP-SE7 / X-SE7 (En)
4 4