Clock Adjustment - Kenwood R-SE7 Instruction Manual

44

Clock adjustment

This unit incorporates a clock function. Be sure
to adjust the correct time before using the timer
function.
Ensure that the pow er is OFF.
1
Activate the clock adjustment mode.
2
Enter the hour.
3
Enter the minute.
Downloaded from: http://www.usersmanualguide.com/
auto/mono
volume pure
control
1
∞ ∞
down up
To decrease To increase
the figure the figure
2
enter
pure
volume
1
control
∞ ∞
down up
To decrease To increase
the figure the figure
2
enter
Example: Adjustment to 8:45
÷ The time display starts to blink.
A
÷ The time of the day is represented in 12-hour AM /PM
method.
÷ Press the "enter" key. The hour is entered and the
minute display starts to blink.
A
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the "enter" key at the same
moment as a time announcement.
÷ The time display blinks after a pow er failure or w hen the
pow er cord has been unplugged from the AC outlet and
plugged again. In such a case, adjust the clock again.
A M 1 2 ) )
A M 8 ) )
A M 8 4 5
R-SE7 / DP-SE7 / X-SE7 (En)
R-SE7
:
R-SE7
:
R-SE7
: