Collective Presetting Of Stations (Auto Preset); One-By-One Presetting (Manual Preset) - Kenwood R-SE7 Instruction Manual

Collective presetting of stations (auto preset)

1 Receive a FM broadcast.
2 Keep the "enter" key depressed (for 2 sec or
more).
During recording, the indica-
tor "A M EM O" flashes.

One-by-one presetting (manual preset)

1 Press the "enter" key during reception.
Presetting is cancelled w hen no
operation is executed for 5 sec-
onds or more.
2 Select one of the preset numbers from 1 to 40.
Presetting is cancelled w hen
no operation is executed for 5
seconds or more.
3 Press the "enter" key again.
AUTO
F M
Lights during stereo reception
AUTO
F M
÷ When a key is held depressed, preset stations w ill be
skipped at an interval of about 0.5 second.
÷ Preset calls also can be made by numerical input via the
numeric keys on the remote control. When the key for
the tens digit has been pressed erroneously at the time
of input, press the +10 key several times to return to the
original display and then enter the number again.
Downloaded from: http://www.usersmanualguide.com/
enter
volume
control
enter
8 8 ) ) .
Frequency display
ST. TUNED
8 9 ) ) .
The " TUNED " indicator lights
w hen a station is received.
÷ Up to 30 stations can be memorized.
÷ For use of the RDS function, stations must be memo-
rized by RDS auto presetting.
÷ RDS stations are given priority during auto presetting. If
there is memory left after presetting, the receiver contin-
ues presetting regular FM stations.
A M E M O
÷ For memorizing of stations other than RDS stations (FM ,
AM ), memorize the stations according to chapter " One-
enter
by-one presetting (manual preset)" .
) -
A
pure
) 3
÷ Repeat steps 123 to preset other stations.
÷ If several stations are preset under the same number, the
previous memory is replaced w ith the latest memory
contents.
R-SE7
Select the tuning mode.
auto/mono
MHz
Use the manual tuning mode w hen reception is
noisy due to w eak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
R-SE7
÷ Normally, use the AUTO (Auto tuning) mode.
MHz
About display change during tuner reception
The display w ill change each time the DISPLAY
key is pressed.
AUTO
" M EM O. " lights (for approx. 5 sec.)
AUTO ST. TUNED
8 9 ) ) .
AUTO ST. TUNED
8 9 ) ) .
Each press alternates the mode.
1"AUTO" lit (Auto tuning)
2"AUTO" not lit (M anual
tuning)
1Reception band/ Frequency
2Preset number/ Frequency
3Clock
27
Hearing sound
R-SE7 / DP-SE7 / X-SE7 (En)
MEMO.
MHz
Goes off
MHz