Timer Programming - Kenwood R-SE7 Instruction Manual

46
Adjust the clock before setting the timer.

Timer programming

This is a 24 hour timer.
Select the time and duration for the operation and the contents, and select operation or no operation
as required.
Adjust the clock before setting the timer.
1
M ake preparations for the play (recording).
÷ To listen to radio
The station should
be preset prior to
¶
the above.
2
Adjust the listening volume.
3
Set the on/standby sw itch to standby
position.
4
Select a program No.
Downloaded from: http://www.usersmanualguide.com/
÷ To listen to CD
Insert a disc.
(Program playback
is not possible.)
volume pure
control
on/standby
1
band
During display of program content
2
enter
÷ To listen to tape
Set a tape into deck.
A
÷ For recording of broadcasts, muting becomes ON auto-
matically w hen the pow er is sw itched on by the timer.
÷ The "PROG." indicator lights.
÷ When a timer reservation already has been made, the
contents w ill change to the new settings.
÷ Listening to M D
Set a disc into the
M D recorder.
For recording and playback w ith an M D
recorder (DM -SE7), also refer to the instruc-
tion manual enclosed w ith the DM -SE7.
1 ) ) ) :
Timer operation
R-SE7 / DP-SE7 / X-SE7 (En)
÷ For recording
M ake prepa-
rations for re-
cording.•
(Steps 1 to 4)
R-SE7
PROG.