Table of Contents
Advertisement
035-09651-001-A-0304
All dimensions are in inches. They are
subject to change without notice. Certified
dimensions will be provided upon request.
ACCESSORIES
•
ELECTRIC HEATER - Add 14-1/4" to unit height when used.
•
SUPPLY AIR PLENUM - Add 27-1/2" to unit height when used.
•
BASE - Add 20" to unit height when used.
FIG.12 - UNIT DIMENSIONS & CLEARANCES (F3EH090 & F4EH120)
CLEARANCES
Side with RETURN AIR opening
Side with SUPPLY AIR opening
Side with PIPING CONNECTIONS
Side opposite PIPING CONNECTIONS
Side with access for both POWER & CONTROL WIRING
Bottom
Unitary Products Group
1
Overall dimension of the unit will vary if an electric heater, a
24"
supply air plenum or a base is used.
1
24"
2
This dimension is required for removal of the coil. Only 26" is
2
52"
required for normal servicing.
12"
3
Although no clearance is required for service and operation,
some clearance may be required for routing the power wiring
3
–
and the control wiring.
4
–
4
Allow enough clearance to trap the condensate drain line.
11
Hide quick links:
Advertisement
Table of Contents
