Basic Operat Ions Stealth Retraction M Echanism - Kenwood KDC-7060R Instruction Manual

Basic operations
(See page 6)
St ealt h Ret ract ion M echanism
You can help prevent theft of the unit by reversing the
faceplate so that the control panel cannot be seen, hiding the
unit, and shutting off the audio.
Pow er ON/ OFF:
When you turn your vehicle's ignition on, the unit's pow er w ill
also turn on, w ith the faceplate reversing to show the control
panel.
When you turn your vehicle's ignition off, the faceplate w ill
reverse to hide the control panel, and the unit's pow er w ill turn
off.
N OTE
• When the moving faceplate is hit by an object, it w ill stop and
return to its original state. Remove the object and repeat the
action.
• The status of the Code Security Function (P.33) is displayed
w henever the pow er is sw itched on.
"CODE ON" (Code Security has been registered)
"CODE OFF" (Code Security has not been registered)
2CA U TION
Using the Unit in Vehicles with Covered Consoles
• M ake sure the console is uncovered w hilst the faceplate is
reversed.
• Do not exert any excess force on the movable parts of the unit,
including the faceplate, as it can cause failure in the unit's
mechanism.
Hiding the unit w ith the ignition turned on (forced closing):
Hold dow n the SRC button for one second or more.
The faceplate w ill reverse, hiding the unit. The unit w ill turn
off.
N OTE
• When the closing faceplate is hit by an object, the unit w ill turn
off w ithout the faceplate closing all the w ay. Remove the object
and press the SRC button to turn the unit back on, then turn it
off again to make it close properly.
• Whilst the control panel is moving, pressing the buttons w ill not
have any effect. Do not try to press the buttons on the control
panel as the faceplate is moving, as excessive force may
damage the unit.
• During the forced closing of the unit (i.e., having the unit left
closed w hilst ignition is turned on), the faceplate w ill not open
no matter how often the ignition is turned on or off, unless " the
touch-sensitive spot" at the rear of the faceplate is pressed in
order to open it. You can prevent tampering of the unit w hen
letting someone else drive your car by keeping it closed this
w ay.
To cancel the stealth retraction mechanism's forced closing of
unit and open control panel:
Press " the touch-sensitive spot" at the rear of the faceplate.
(as illustrated)
N OTE
Touch-sensitive spot
The invisible sw itch is hiding behind the touch-sensitive spot.
Press the hollow spot (invisible sw itch) to open.
— 9 —
Touch-sensitive spot