Steering Remote Control; Remote Control; Basic Operations; Stealth Retraction Mechanism - Kenwood KRC-PS959R Instruction Manual

Buttons and Display

Steering remote control

u
UP
5
ATT
VOLUME
∞
ATT
DWN
d

Remote control

#0~9
A~Z
+
TUNE
ABC
1 2
¢
+
GHI JKL
TRACK
4 5
PRS TUV
–
TUNE
7 8
4
QZ
–
TRACK
0
– +
AM
TUNE
TRACK
REW
AM FM
–
– +
DISC
DISC
REW FF
REMOTE CONTROL UNIT
FM
FF
+
DISC
Optional for the KRC-759R
¢
+
FM/DISC
¢
+
FM/DISC
SRC
SRC
4 –
AM/DISC
–
AM/DISC
4
Optional
TUNER
TAPE
DEF
3
TUNER
MNO
6
TAPE DIRECT
OK
WXY
9
CD
CD ¥ MD CH
DIRECT CD·MD
OK
CH
DNPP
DNPP
VOL.
PROG
u
d
PROG
38

Basic operations

Stealth Retraction Mechanism

You can help prevent theft of the unit by reversing the
faceplate so that the control panel cannot be seen, hiding the
unit, and shutting off the audio.
Power ON/OFF:
When you turn your vehicle's ignition on, the unit's power will
also turn on, with the faceplate reversing to show the control
panel.
When you turn your vehicle's ignition off, the faceplate will
reverse to hide the control panel, and the unit's power will turn
off.
NOTE
• When the moving faceplate is hit by an object, it will stop and
return to its original state. Remove the object and repeat the
action.
• The status of the Code Security Function (P.34) is displayed
whenever the power is switched on.
"CODE ON" (Code Security has been registered)
"CODE OFF" (Code Security has not been registered)
2CAUTION
Using the Unit in Vehicles with Covered Consoles
• Make sure the console is uncovered whilst the faceplate is
reversed.
• Do not exert any excess force on the movable parts of the unit,
including the faceplate, as it can cause failure in the unit's
mechanism.
Hiding the unit with the ignition turned on (forced closing):
Hold down the SRC button for one second or more.
The faceplate will reverse, hiding the unit. The unit will turn
off.
NOTE
• When the closing faceplate is hit by an object, the unit will turn
off without the faceplate closing all the way. Remove the object
and press the SRC button to turn the unit back on, then turn it
off again to make it close properly.
• Whilst the control panel is moving, pressing the buttons will not
have any effect. Do not try to press the buttons on the control
panel as the faceplate is moving, as excessive force may
damage the unit.
— 8 —
(See page 5)