Related Manuals for Clarke CPSB1
Summary of Contents for Clarke CPSB1
- Page 1 PORTABLE SANDBLASTER HOPPER KIT MODEL NO: CPSB1 PART NO: 7640125 OPERATION & MAINTENANCE INSTRUCTIONS LS0509...
-
Page 2: Parts And Servicing
INTRODUCTION Thank you for purchasing this Clarke Portable Sandblaster Hopper Kit. Before you try to use this product, read this manual and follow the instructions carefully. In doing so you will ensure your safety and the safety of others around you. You can also look forward to a purchase that gives you long and satisfactory service. -
Page 3: General Safety Rules
GENERAL SAFETY RULES Warning: Compressed air can be dangerous. Ensure that you are thoroughly familiar with all precautions relating to the use of compressors and compressed air supplies. 1. Read this instruction manual before connecting the sandblaster to a compressor. 2. -
Page 4: Part Identification
PART IDENTIFICATION Unpack your sandblaster, should there be any damage caused during transit contact your Clarke dealer immediately. Handle Hook Hopper Hook Delivery Hose Sandblasting Gun Please dispose of any packaging responsibly. The cardboard packaging can be recycled. -
Page 5: Operation
OPERATION USING YOUR SANDBLASTER The compressor used must be at least 3hp and capable of supplying a minimum of 10 CFM of air Connect an air hose (sold FIG 1 separately) from your compressor, to the hose fitting on the sandblasting gun. -
Page 6: Specifications
SPECIFICATIONS CPSB1 Sand Grade Type Up to 60 Grit (Clarke AOP60) Abrasive Material Aluminium Oxide, Garnet Powder, Glass Bead Sand Capacity: (kg/lbs) 22.7/50 Operating Pressure: (psi) 100-150 Minimum Flow Rate Req: (cfm) Compressor Size Hp: (Minimum) Air Fitting: 1/4” NPS... - Page 7 NOTES...