fantastic furniture HAVANA Lowline Large Manual page 6

Step 3
You will need
8 x Cam Bolts
Phillips head
(H3)
screwdriver
Attach 8 x Cam Bolts (H3) into Legs (P7, P8, P9, P10) using a Phillips head screwdriver.
Step 4
You will need
4 x Small
4 x Cam Nuts
Dowels (H2)
(H4)
Flat head
screwdriver
(P4)
Insert 4 x Small Dowels (H2) into the holes of Shelf Panel (P6) as shown.
Insert 4 x Cam Nuts (H4) into into the holes of Shelf Panel (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Dividers (P3, P4) to Shelf Panel (P6),
then tighten the cam nuts using a Flat head screwdriver.
www.fantasticfurniture.com.au
H3
H3
(P7)
H3
H3
(P9)
(P6)
H4
H2
H4
H3
H3
(P8)
H3
H3
(P10)
Make sure raw edge
is facing up.
H2
H4
H4
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
PAGE 6