Programmed Play (Pgm Mode) - Kenwood CD Series Instruction Manual

Programmed play (PGM mode)

Use the follow ing procedure to program desired tracks in a
desired order. (up to 32 tracks)
14
Preparation
1
Press so that the "PGM " indicator lights.
2
Program desired tracks.
3
Start playback.
Downloaded from: http://www.usersmanualguide.com/
÷ Load a disc in the CD player.
Do this operation in the stop mode.
P.M ODE
1
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Go to step 2 w ithin 8 seconds.
2
Select the desired track No.
M ain unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Go to step 3 w ithin 8 seconds.
3
Set the entry.
P.M ODE
4
Repeat steps 1, 2 and 3 above.
6
REM OTE CON TROL UN IT
RC-P0 6 0 1
: Keys and controls used in the operations described on this page.
CD-206/ DPF-R6010
P
CD-204/ 203/ DPF-R4010/ R3010
P
DISC 5
In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/
DPF-R6010 only)
Press the numeric keys as show n below ....
To enter track No. 25 :
CD-206/ DPF-R6010
P G
P G
3
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
6
9
P
+1 0
CD-204/ 203/ DPF-R4010/ R3010
PGM
1 2
÷ Tracks can also be selected by pressing the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the 4 or ¢ key is pressed during playback, the track w ill be
skipped in the direction of the pressed button.
÷ When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.
G M 1 0 D I S ?
Light up.
PGM
1 2 3 4 5
G M 1 0 D 1 T O
005
M 1 0 D 1 T O
«
M 1 0 A B C D
G M 1 0 D 1 T O
DISC REPEAT
N O. TRACK N O.
1
2 5 P _ 0 1
3 4 5
Track number
Blinks.
C
N . ? ?
N . 5 2
E F G H
N . 5 2
5