Preparing To Play Tracks - Kenwood CD Series Instruction Manual

Preparing to Play Tracks

Preparation
Press the ON/ STANDBY (POWER /
Loading/unloading discs
1
Load/unload a disc.
2
Close the tray.
ALL TEXT SEARCH (CD-206/DPF-R6010 only)
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allow s text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.
After loading all the discs, operate in stop mode.
REM OTE CON TROL UN IT
RC-P0 6 0 1
÷ The information read into the CD player is cleared w hen
the tray is opened. Therefore, perform this operation
again if the tray w as opened.
Downloaded from: http://www.usersmanualguide.com/
• Turn the unit ON.
POW ER
-ON –STAN DBY
1
Open the tray.
0
2
Place/ remove a disc.
Label side
Disc tray
3
When loading or unloading other discs
DISC SKIP
0
ALL TEXT
SEARCH
)key.
REM OTE CON TROL UN IT
RC-P0 6 0 1
: Keys and controls used in the operations described on this page.
÷ Do not touch the played side of disc.
÷ Loading tw o discs together w ill cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction w ill result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used w ith this unit.
÷ When loading/unloading a disc w hile the tray rotates, a malfunction
might occur. Load/unload the disc w hen the tray does not rotate.
CD-206/ DPF-R6010
DISC 1
All DISC indicators "
CD-204/ 203/ DPF-R4010/ R3010
All DISC indicators "
Remote control unit only
Search in progress or reading information
D
D
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the "D1 : NO CD TEXT" display w ill
appear for approx. 3 seconds.
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.
DISC 2 DISC 3 DISC 4
" light regardless of how many discs are present.
DISC SIN GLE
N O. TRACK N O. TOTAL
1
0 1
1 2 3 4 5
" light regardless of how many discs are present.
Blinks.
I S C R A E D I
«
1 : CD T E
When the disc is CD-TEXT
9
DISC 5
1 2 3 4 5
6 7 8 9 1 0
0 0 0 :
N G
X T