M Ulti Edit - Kenwood CD Series Instruction Manual

Several CDs can be edited and recorded on 1 tape.
Choose songs from each disc, and edit/ record w hile con-
firming the remaining time on files A and B, respectively.

M ULTI EDIT

1
Press so that the "M ULTI EDIT " indicator light.
2
Enter the recording time of the tape.)
3
Select the desired track.
4
Start recording.
When recording w ith a cassette deck equipped w ith CCRS
function:
When recording w ith a normal cassette deck:
5
Repeat step 3,4 above.
Downloaded from: http://www.usersmanualguide.com/
(Except for CD-206/DPF-R6010)
Do this operation in the stop mode.
EDIT
Press tw ice
1
Select the disc (one disc only).
DISC 1 DISC 2 DISC 3 DISC 4
2
Select the tracks to be recorded.
M ain unit Remote control unit
1 2
4 ¢
4 5
7 8
«
P.M ODE
0
Press the CCRS key (Cassette deck).
1
Adjust the recording levels.
2 Press the record key.
3
Play the CD.
REM OTE CON TROL UN IT
RC-P0 6 0 1
: Keys and controls used in the operations described on this page.
DISC 5
÷ If you made a mistake, press the CLEAR key and select the correct
3
track.
÷ The time remaining on side A or side B is indicated on the display.
6
÷ When the time left on side A is less than the play time of the selected
song, that song w ill be programmed on side B.
9
÷ If "FULL" is displayed, no further programming can be accepted.
+1 0
÷ With the CCRS function, the recording starts after about 1 minute.
÷ If you have a cassette deck capable of Double-speed recording, use
Normal-speed recording.
÷ Change discs and, if the "b-01" indication is given w hen you first select
a song, turn the tape to the start of side B.
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.
Light up.
M ULTI
PGM
EDIT DISC
N O.
1 2 3 4 5
Editing
21