Kenwood CD Series Instruction Manual page 22

To check the edited contents
22
CD-206/ DPF-R6010
REM OTE CON TROL UN IT
RC-P0 6 0 1
CD-204/ 203/ DPF-R4010/ R3010
Playing or recording the edited contents
To clear the edited contents
During Normal EDIT:
During M ULTI EDIT:
1. While you can edit w ith a different time setting to that of the tape you are using, part of the tape may be left w ith nothing recorded on it, or the
last track on side A or side B may be cut short.
Notes Notes
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
Downloaded from: http://www.usersmanualguide.com/
CHECK
CHECK
6
Press any one of these keys.
P.M ODE
M ain unit Remote control unit
(CD-206/DPF-R6010 only)
CLEAR
CLEAR
0
Do this operation in the stop mode.
P.M ODE
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
CD-206/ DPF-R6010
E D I T A 01
÷ When the CHECK key is pressed, track numbers and remaining time in
the file A are displayed first, then those in the file B.
CD-204/ 203/ DPF-R4010/ R3010
DISC
N O. TRACK N O.
4
A F I L E
During normal EDIT:
÷ When the CHECK key is pressed, the track Nos. of edited songs w ill
automatically be displayed in the order they are edited.
During M ULTI EDIT:
÷ Every time the CHECK key is pressed, the track Nos. are displayed in
the edited order.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
÷ Do not adjust the output level from this unit particularly during record-
ing.
÷ For details, see the instruction manual of the cassette deck.
Press the 6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
Note Note
edited for tape side B. Press the 6 key again to continue
playback.
÷ The edited data is cleared entirely.
Editing
P.C. indicator light up.
P.C.
5