Programmed Play (Pgm Mode) - Kenwood CD-206 Instruction Manual

Programmed play (PGM mode)

Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
14
Preparation
1
Press so that the "PGM" indicator lights.
2
Program desired tracks.
1
2
3
4
3
Start playback.
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
÷ Load a disc in the CD player.
Do this operation in the stop mode.
P.MODE
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Go to step 2 within 8 seconds.
Select the desired track No.
Main unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Go to step 3 within 8 seconds.
Set the entry.
P.MODE
Repeat steps 1, 2 and 3 above.
6
REMOTE CONTROL UNIT
RC-P0601
: Keys and controls used in the operations described on this page.
CD-206/DPF-R6010
P
CD-204/203/DPF-R4010/R3010
P
DISC 5
In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/
DPF-R6010 only)
Press the numeric keys as shown below....
To enter track No. 25 :
CD-206/DPF-R6010
P G
P G
3
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
6
9
P
+10
CD-204/203/DPF-R4010/R3010
PGM
1 2
÷ Tracks can also be selected by pressing the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷ When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
G M 1 0 D I S ?
Light up.
PGM
1 2 3 4 5
G M 1 0 D 1 T O
005
M 1 0 D 1 T O
«
M 1 0 A B C D
G M 1 0 D 1 T O
DISC REPEAT
NO. TRACK NO.
1
2 5 P _ 0 1
3 4 5
Track number
Blinks.
C
N . ? ?
N . 5 2
E F G H
N . 5 2
5