Advertisement
QS4500TE0001
Figure 3 Vertical Power Panel
Step 3: Turn generator OFF at the Generator Control
Panel. This will prevent unexpected activation of the
generator.
Step 4: Connect Engine Generator Control to
Figure 5 Engine Start Contact Location
Effective 6/01
Tighten Cables Into Terminals
B
Detail
Typical
Figure 4 Horizontal Power Panel
Terminals 51, and 52 (Red) (Figure 5). This contact is
CLOSED whenever the engine generator is needed,
and should be connected to a generator controller.
NEVER connect directly to a starter solenoid or ignition
system.
B
See Detail
Engine Start Contacts
(Red Terminals)
Page 3
Advertisement
