Yamaha YP250A 1999 Supplementary Service Manual page 33

Front turn signal light (right)
1
Front turn signal light (left)
2
Handlebar switch lead (right)
3
Front stop switch lead
4
Seat lock cable
5
Throttle cable
6
Handlebar switch lead (left)
7
Rear brake switch lead
8
Handlebar under cover
9
Stay
10
Horn
11
Front brake hose
12
CABLE ROUTING
Front wheel sensor
13
Horn
14
ABS test terminal
15
Handlebar upper cover
16
Handlebar
17
Front turn signal light
18
Grip heater lead (option)
19
A Route the front wheel sensor
through the guide on the frame.
B Route the handlebar switch lead
and front brake switch lead
through the guide.
25
SPEC
C Route the front brake hose
through the right hole of the han-
dlebar under cover.
D Route the rear brake hose through
the left hole of the handlebar under
cover.
E Fasten the handlebar switch lead
(left) and rear brake switch lead to
the handlebar with a plastic lock-
ing tie. Cut the end of locking tie at
5 mm or less.