Other Abs Mechanism Components - Yamaha YP250A 1999 Supplementary Service Manual

Main switch
Main switch
ON
OFF
"ABS"
Goes off
warning light
Main switch Main switch Main switch
OFF ON
"ABS"
Goes Goes on for
warning
2 seconds.
off
light
Preparation
"ABS"
warning light
ANTI-LOCK BRAKE SYSTEM (ABS)
Goes on for
Goes off
2 seconds.
Preparation
Starter switch
Main switch
OFF
ON
Starter switch
OFF ON
Goes
Goes on while the
starter switch is pushed.
off
Goes on

OTHER ABS MECHANISM COMPONENTS

ABS warning light
The ABS warning light 1 is designed to inform the
ABS self diagnostic result and located in the meter
panel.
Going on the ABS warning light
1. Turn the main switch on
It goes on for about 2 seconds. It executes the
self diagnosis during this period and goes off.
2. When the main is turned on and starter switch
is pushed.
NOTE:
Depends on the following requirement
S When applying the brake lever
S When the engine stop switch is off
Goes
off
S When the sidestand is used
ABS warning light keeps going on while starter
switch is pashed. The ABS warning light discon-
nection is confirmed.
NOTE:
Engine oil warning light goes on while the starter
switch is pushed.
3. Light goes on while riding.
Malfunction is detected in the ABS. In this case,
the ABS hydraulic control is not performed and
it becomes the normal braking state.
35
CHAS