Table of Contents
Advertisement
LEVEL ADJUSTMENT
MOVING THE TREADMILL
CONVERTING TO TABLE / BENCH
FIG. 1
A.
B.
A. Turn the power switch off.
B. Unplug the power cord.
C. Fold the treadmill and make sure the lock is secured.
D. Make sure the motor is on the bottom side.
E. Simply roll the treadmill with two transportation wheels
Make sure the
motor is on the
bottom side.
After placing the equipment in the intended location for
use, make sure the item rests firmly on the floor. To
level the item, please follow the steps below.
Tip the item to the left/right. You will then see the
Levelers (23). To make the Leveler (23) rests firmly
on the floor, turn the Leveler (23) clockwise until the
Leveler (23) touches the floor without rocking. Repeat
the above process until the item is level.
to the desired location.
To change the treadmill into table or bench position,
follow the drawing on the left to gently lie the treadmill
on the floor.
NOTE:
The purpose of the adjustable Stand (23) is to
level the item. Adjust the Stands (23) on four sides until
the item sets on the floor without rocking.
9
Advertisement
Table of Contents
