Table of Contents
Advertisement
WALKING BELT ADJUSTMENT
Adjustment
Bolt Location
A. Open the Storage Door (13).
B. Allen Wrench (35) is attached on back of the Storage
Door (13).
C. To adjust the belt, please take a look at the following
steps.
CENTERING THE BELT: If the walking belt
is off center to the LEFT:
A. If the belt is off-center, first run the treadmill with no user
on it at 4 mph for 1-2 minutes to allow the walking belt
re-center on its own. If this fails, continue to step 2.
B. Stand behind the treadmill, with the treadmill running at
4 mph (6 kph). If the belt tracks off center to the left or
right, please follow the steps in Step 3 to center the belt.
Caution: Be very careful to keep your fingers and
any loose object away from the belt and rollers.
C. Use the Allen Wrench –
a. To turn the left rear roller adjustment bolt 1/4 turn in
clockwise direction, which moves the running belt to
the right.
b. Or turn the right rear roller adjustment bolt 1/4 turn
in counterclockwise direction, which moves the
running belt to the right.
Caution: Do not turn the adjustment bolt more than
¼ turn at a time. Over tightening the belt can
damage the treadmill.
Repeat the above procedure until the walking belt is
centered. It may be necessary to test the walking belt
tension once you have completed the above procedure if
the belt feels like it's slipping while walking. Refer to the
"Walking Belt Slipping" instructions.
18
Advertisement
Table of Contents
