Download Print this page

Fermax 3389 Manual

Large universal frame

Advertisement

Quick Links

Cod. 97724d V05_20
Medidas: 210 x 240 mm (ancho x alto)
1. Separar los tapones del marco.
2. Utilizar el marco para marcar los 4 agujeros en la pared.
3. Si hay alguna caja de empotrar, se debería hacer
coincidir el mayor número de agujeros posibles con el marco.
Measurements: 210 x 240 mm (width x height)
1. Remove the tabs from the frame.
2. Use the frame to mark 4 holes on the wall.
3. If there is a built-in box, try to set as many holes
as possible in line with the frame.
1
La base del Teléfono iLOFT se fi ja utilizando los agujeros marcados 2, 13 y 15.
The iLOFT Telephone base is fastened with the holes marked 2, 13 and 15.
La base du poste iLOFT est fi xée en utilisant les trous marqués 2, 13 et 15.
Der Gehäuseboden des Telefons iLOFT wird durch Verwendung der Löcher 2, 13 und 15 verschraubt.
MARCO UNIVERSAL LARGE · LARGE UNIVERSAL FRAME
CADRE UNIVERSEL LARGE · LARGE UNIVERSAL RAHMEN
Ref. 3389
Medidas: 210 x 240 mm (ancho x alto)
1. Separar los tapones del marco.
2. Utilizar el marco para marcar los 4 agujeros en la pared.
3. Si hay alguna caja de empotrar, se debería hacer coincidir
el mayor número de agujeros posibles con el marco.
Measurements: 210 x 240 mm (width x height)
1. Remove the tabs from the frame.
2. Use the frame to mark 4 holes on the wall.
3. If there is a built-in box, try to set as many holes as
possible in line with the frame.
3
2

Advertisement

loading

Summary of Contents for Fermax 3389

  • Page 1 MARCO UNIVERSAL LARGE · LARGE UNIVERSAL FRAME CADRE UNIVERSEL LARGE · LARGE UNIVERSAL RAHMEN Ref. 3389 Cod. 97724d V05_20 Medidas: 210 x 240 mm (ancho x alto) Medidas: 210 x 240 mm (ancho x alto) 1. Separar los tapones del marco.
  • Page 2 En el caso del Monitor VEO DUOX, antes de marcar los orifi cios en la pared, hay que abrir los 2 agujeros de las torretas 27 y 34. Se recomienda broca de metal de 2,7 mm. El conector se fi ja al marco usando los agujeros marcados 27, 34, 35 y 36.
  • Page 3 En el caso del Teléfono VEO / LOFT / CITYMAX, antes de marcar los orifi cios en la pared, hay que abrir los 4 agujeros de las torretas 16, 17, 22 y 23. Se recomienda broca de metal de 2,7 mm. For the VEO / LOFT / CITYMAX Telephone, before marking the holes on the wall, make the 4 holes on turrets 16, 17, 22 and 23.
  • Page 4 El conector smile (para monitores Smile de 3,5” y 7”), se fi ja al marco usando los agujeros marcados 1, 3, 10 y 12. The smile connector (for the 3.5” and 7” Smile monitors), is fastened to the frame by using holes 1, 3, 10 and 12. Le connecteur smile (pour moniteur Smile de 3,5”...