Usb Port Installation - Junsi CellLog 8S User Manual

Cell Voltage Monitor & Logger

USB port installation

Install USB driver
This release of the USB driver is contained on the CellLog 8S software CD-ROM.
To install the USB driver, run the program X:\USB driver\JunsiUSBInstaller.exe (where X is the drive letter
designator for your CD-ROM drive.)
Charger firmware upgrade steps
 Install the CellLog 8S USB driver
 Run the program X:\Upgrader\Upgrader.exe (you can download the Upgrader.exe software from the
following website: http://www.jun-si.com/UploadFiles/Upgrader.rar
 Connect the CellLog 8S to the PC using the supplied USB cable, choose ―Device‖ in ―Device List‖, then
select the upgrade file (you can download the latest file). The progress bar will appear after you click
―Update...‖
).
-15-
CellLog 8S