Advertisement
Quick Links
INSTRUCTIONS-PARTS LIST
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Electronic Lubricant Valve, Metered or Unmetered
Hi-Flow In-Line Dispense Valves
1500 psi (105 bar) Maximum Working Pressure
FOR USE WITH PETROLEUM-BASED LUBRICANTS ONLY
WITHOUT METER
222461
For Oil, includes cap
222561
For Oil, includes Hi-Flow nozzle
WITH ELECTRONIC METER
Measures in gallons/quarts/pints*
For Oil, includes cap {
222471
For Oil, includes Hi-Flow nozzle {
222441
*
Meter is factory-set in quarts
Measures in liters
For Oil, includes cap { }
222571
For Oil, includes Hi-Flow nozzle { }
222541
{ These products contain P/N 222560
which is Factory Mutual
approved as intrinsically safe for
Class I, Division1, Groups A,B,C,D.
} These products contain P/N 222660
which is listed by the Canadian
Standards Association as certified
as intrinsically safe for Class I,
Division 1, Groups A,B,C,D.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
MODEL 222461
MODEL 222561
MODEL 222471
or 222571
MODEL 222441
or 222541
ECOPYRIGHT 1990, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
308113K
02234
02235
02232
02233
Advertisement
Related Manuals for Graco 222461
Summary of Contents for Graco 222461
- Page 1 Standards Association as certified as intrinsically safe for Class I, Division 1, Groups A,B,C,D. MODEL 222441 or 222541 02234 02235 02232 02233 GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 ECOPYRIGHT 1990, GRACO INC. Graco Inc. is registered to I.S. EN ISO 9001...
- Page 2 ....aluminum, carbon steel, copper, polyurethane, nitrile rubber TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor Tested in No. 10 motor oil. Flow rates vary with fluid closest to you: 1–800–533–9655 Toll Free...
- Page 3 D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before you operate this equipment. D Use the equipment only for its intended purpose. If you are not sure, call your Graco representative. D Do not alter or modify this equipment.
- Page 4 WARNING WARNING SKIN INJECTION HAZARD Spray from the dispensing valve, leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. D Fluid injected into the skin may look like just a cut, but it is a serious injury.
- Page 5 This is the best way to activate the meter, because it also clears the quantity of the last dispense cycle. GRACO The digital display can also be activated by pressing the TOTAL key pad or by running fluid through the me- ter.
- Page 6 Operation – Metered and Unmetered Dispense Valves Unscrew before dispensing fluid Rotate knurled sleeve of coupler (b) clockwise to open it for dispensing 02229 Fig. 5 Trigger the dispense valve. Lubricant begins to flow WARNING with the slightest movement of the trigger and contin- ues to flow until the trigger is released.
- Page 7 Troubleshooting – Electronic Meter Pressure Relief Procedure WARNING 1. Turn off the power supply to the pump. PRESSURIZED EQUIPMENT HAZARD The equipment stays pressurized until pressure is manually relieved. To re- 2. Trigger the valve into a waste container to relieve duce the risk of serious injury from pres- pressure.
- Page 8 WARNING Use only genuine Graco replacement parts. The use of any other parts may impair the intrinsic safety of this meter. This could result in a failure, which could cause serious bodily injury and/or substantial property damage.
- Page 9 (18). Inspect the seat for nicks. If the D Refer to the Parts Drawing on page 10 when you seat is damaged, send the valve to a Graco-authorized service the control valve. service center for repair. If the seat is not damaged, reassemble the valve.
- Page 10 Parts – Valve **214008 Repair Kit Model 224304 Valve Only Must be purchased separately. Includes: Ref No. **13 23** 12** Torque to 19 to 21 ft-lb 02228 (26 to 28 N-m) Part No. Description Part No. Description 108445 PIN, spring; 5/32 in. (4.0 mm) dia; 12** 158673 PACKING, v-block;...
- Page 11 CAP & CHAIN 235900** METER, liter 158491 NIPPLE 172479 TAG, WARNING, not shown Model 222541, Includes Hi-Flow Nozzle Without Meter Part No. Description Model 222461, Includes Cap 224304* VALVE 186660 SPOUT 223920 HI-FLOW NOZZLE see parts below Part No. Description 235900**...
- Page 12 Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defective, with the exception of defects in the electronic meter control, including the battery, which will be repaired or replaced for twenty-four months from the date of sale.