Advertisement
Quick Links
Instructions
DataTrak
Kit
For converting NXT Air Motors to include the DataTrak module.
Part No. NXT606 Kit, for NXT Model 6500 Air Motors
Part No. NXT306 Kit, for NXT Model 3400 Air Motors
Part No. NXT206 Kit, for NXT Model 2200 Air Motors
Important Safety Instructions
Read all warnings and instructions in this manual
and in the NXT air motor manual 311238.
Save these instructions.
Models with DataTrak
agency approvals listed below.
9902471
Class I, Div 1,
Group D T3A
2575
II 1 G
Ex ia IIA T3 Ga
ITS13ATEX27862X
™
Conversion
™
include
311486E
EN
TI8213b
Advertisement
Related Manuals for Graco DataTrak NXT606
Summary of Contents for Graco DataTrak NXT606
- Page 1 Instructions ™ DataTrak Conversion 311486E For converting NXT Air Motors to include the DataTrak module. Part No. NXT606 Kit, for NXT Model 6500 Air Motors Part No. NXT306 Kit, for NXT Model 3400 Air Motors Part No. NXT206 Kit, for NXT Model 2200 Air Motors Important Safety Instructions Read all warnings and instructions in this manual and in the NXT air motor manual 311238.
-
Page 2: Installation
™ 1. Take the DataTrak module (1) to a non-hazardous location. 2. Install the battery, see F . 1. Always use a Graco-approved battery, see the NXT air motor manual. Sensor Cable Connection Strain Relief Battery TI8396b . 2. Disassembly... - Page 3 (see NXT air motor See the NXT air motor manual 311238 for setup manual). Use of an unapproved battery or mode instructions. fuse will void Graco’s warranty and Intertek and Ex approvals. 1. Enable runaway and set the runaway limit.
- Page 4 Parts Parts TI8395b . 3. Parts Drawing Ref. Part Description Qty. NXT402 MODULE, DataTrak; includes item NXT401 HOUSING, DataTrak; includes items 2 and 4 120279 SCREW, thread-forming; #6 x 5/8 in. (16 mm) 107257 SCREW, thread-forming; 1/4-20 x 1/2 in. (13 mm) NXT404 SENSOR, reed switch;...
- Page 5 Parts 311486E EN...
-
Page 6: Graco Standard Warranty
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.