IDTECH SecureHead User Manual page 3

User Manual, SecureHead USB and UART Interface
Revision Date
50 10/20/2010
51 10/25/2010
52 11/12/2010
A 05/09/2011
B 06/21/2011
C 09/20/2011
D 03/23/2012
E 02/04/2013
F 06/05/2013
G 7/13/2015
H 8/31/2015
I 10/11/2016
K 11/19/2020
Copyright © 2010-2020, International Technologies & Systems Corporation. All rights reserved.
Revision History
Description of Changes
Initial Draft
Revised read status command
Added decryption examples
Added UART interface cable pinout
-Added SecureHead mounting option with drawing
to indicate track 1 location
-Edited original and enhanced encryption output
format
-Changed device serial number length from 8 byte
to 10 byte
Added design guidelines for head installation
- Updated USB interface Cable Pin Out
- Updated power information
-Added design guidelines on preloading the spring
-Added cable length tolerance
Added the new mask feature in SecureHead
firmware v5.00 for UART interface and v 5.03 for
USB interface
Update appendix I magnetic heads mechanical
design guidelines
Remove key loading command
Included bit to indicate status flag of service code if
ICC is present. Section 4.5.4 Note 3
Example data: Appendix J
Remove former section 3.12 Encrypt External Data
Command
Section 2: Update USB voltage to 7ma
Revised Appendix K
Page 3 of 76
By
Jenny W
Jenny W
Jenny W
Jenny W
Jenny W
Yvonne Y
Jenny W
Candy H
Candy H
Jason H
Jason H
Jason H
CB