Table of Contents
Advertisement
GROOVER DESCRIPTION
A. 1007 STANDARD EQUIPMENT
Roll Groover complete with groove and drive rolls for 2"- 12" steel pipe,
Steel/CTS Dual Guide Roll Assembly, one and one-half horsepower
electric motor drive with foot switch. Two stage hydraulic hand pump,
mounting base with footed support legs. Complete set-up and operating
instructions; 2"- 6" rolls on tool, 8"- 12" rolls stored in box, and three
depth gauges covering the range of 2" through 12" pipe are mounted
on the tool.
Shipped in closed wood crate that can be used for storage or rental
tool return.
Shipping Weight: 620 lbs.
B. OPTIONAL EQUIPMENT
STEEL PIPE:
• 2"-12" Schedule 10, 10S; 40,40S Rolls: Consisting of
2"-6" and 8"-12" roll sets.
• 14"-16" Steel Grooving Rolls (Model 1007 only)
CTS COPPER SYSTEM:
• 2"- 8" CTS Copper System Grooving Rolls, 2"- 4" CTS Depth
Gauge, and 5"- 8" CTS Depth Gauge.
OTHER:
• Optional 230 volt, 60Hz, 15 amp, single phase electrical panel
with motor is available for the 1007 Roll Groover
C. GROOVER CAPABILITY
Pipe Material
In.
DN(mm)
Steel
Stainless Steel
Copper
1. All wall thicknesses shown are the maximum wall thicknesses for the indicated pipe material.
2. Minimum wall thickness for each pipe material and size is:
Steel: 2"-12" Schedule 10
Stainless Steel: 2"- 12" Schedule 10S, 40S
Copper:
2"- 2 1/2" - Type M 3"- 8" - Type DWV
D. GROOVING TIMES
This chart shows approximate grooving times with the groover set-up for the proper size and groove diameter and the pipe properly positioned on the
groover. The times shown are average times from the start of rotation of the pipe in the grooving rolls to completed groove.
2
2
1
⁄
2
50
65
0:20
0:20
0:25
RIDGID" is a registered trade mark of Emerson Electric Company.
*"
(See page 16-18 for part numbers)
GROOVER CAPABILITY
2
2
1
⁄
3
2
50
65
80
K, L, M & DWV
MODEL 1007/3007 STEEL PIPE GROOVING TIMES (MINUTES: SECONDS)
Pipe Size (In./DN(mm))/Max Steel Pipe Wall Thickness
3
4
5
80
100
125
0:30
1:00
BUILDING CONNECTIONS THAT LAST
A. 3007 STANDARD EQUIPMENT
Roll Groover complete with groove and drive rolls for 2"-12" steel
pipe, Steel/CTS Dual Guide Roll Assembly, two stage hydraulic hand
pump, mounting base with footed support legs for direct attachment
to your Ridgid
300 Power Drive. Complete set-up and operating
*
instructions; 2"- 6" rolls on tool; 8"-12" rolls stored in box, and
three depth gauges covering the range of 2"-12" pipe are mounted
on the tool. Required Ridgid 300 Power Drive not included.
Shipped in closed wood crate that can be used for storage or
rental tool return.
Shipping Weight: 330 lbs.
Pipe Size/Wall Thickness (Schedule)
4
5
6
100
125
150
200
Schedule 10, 40
Schedule 10S, 40S
6
8
150
200
1:20
1:35
1:50
1,2
8
10
12
14
250
300
350
14
10
12
250
300
350
2:20
2:40
16
400
STD.
16
400
3:00
5
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
