Advertisement
1.-Functional Description and Specifications
Disconnect the plug from the power source before making any assembly, adjustments or changing
WARNING
accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.
HOUSING CAP
COLLET
COLLET
NUT
2.-Assembly
Always unplug Rotary Tool before
WARNING
changing accessories, changing collets
or servicing your Rotary Tool.
COLLET
WRENCH
TO
TIGHTEN
LOOSEN
COLLET NUT— To loosen,first press shaft lock button and
rotate the shaft by hand until the lock engages the shaft
preventing further rotation.
Do not engage lock while the Rotary Tool
CAUTION
is running.
With the shaft lock engaged use the collet wrench to
loosen the collet nut if necessary. The collet nut must be
loosely threaded on when inserting an accessory. Change
accessories by inserting the new one into the collet as far
as possible to minimize runout and unbalance. With the
shaft
SHAFT LOCK
BUTTON
VENTILATION
OPENINGS
SHAFT
LOCK
BUTTON
COLLET
TO
NUT
REGULATOR
BRUSH COVER
(one on each side)
VENTILATION
OPENINGS
SWITCH
lock engaged, finger tighten the collet nut until the
accessory shank is gripped by the collet.
tightening of the collet nut when there is no bit inserted.
COLLETS — Three different size collets (see illus tration), to
accommodate different shank sizes, are avail able for your
Rotary Tool. To install a different collet, remove the collet nut
and remove the old collet. Insert the unslotted end of the
collet in the hole in the end of the tool shaft.Replace collet
nut on the shaft.
Always use the collet which matches the shank size of
the accessory you plan to use.
CAUTION
force a larger diameter shank into a collet.
Note:
Most rotary tool kits do not include all four collets
sizes.
COLLET IDENTIFICATION CHART
Collet sizes can be identified bu the rings on the back
end of collet.
1.6mm Collet has two (2) rings.
2.4mm Collet has three (3) rings.
3.2mm Collet has no rings.
(Included in most tool kits on the tool)
SPEED
CORD
HANGER
Avoid excessive
Never
Advertisement
