Lubrication Of The X / Y Rails - GCC Technologies LaserPro E200 Series User Manual

9.2.2 Lubrication of the X / Y Rails

In order to keep the motion system running smoothly, the X / Y rails of the motion system will
need lubrication on a weekly basis. Use a small amount of light grade machine oil or PS2
grease to a paper or cotton towel and apply to the rails.
You can purchase PS2 grease from NSK dealers worldwide. Please visit
http://www.nsk.com for additional information.
NOTE
• Always clean and lubricate the rails after working with materials that produce lots of
debris (such as wood).
• Too much oil or PS2 grease applied to the X / Y rails will accelerate the
build up of debris.